Research/Guide

A faster desktop study workflow

Run a mineral exploration desktop study in five steps, from deposit model to target areas, in a GIS or GeoTheories, plus geotechnical desk study records.

Updated November 20266 min read

A desktop study, or desk study, is a review of the existing maps, data and reports for a property or area before fieldwork. In mineral exploration you compile the geology, geophysics, geochemistry, prior work and land status for a property to pick target areas for a field visit, or to decide whether to stake, option or buy the ground. A fast desktop study workflow has five steps. In geotechnical and environmental work, a desk study is a review of many of the same records, such as geology, faults and mine records, for ground stability and contamination before a ground investigation (land stability guidance, LCRM).

Step Usual tools In GeoTheories
1. Deposit model Published models such as USGS Bulletin 1693 One deposit-type schema for every occurrence
2. Geology, geophysics and geochemistry Survey portals, QGIS or ArcGIS Pro Every layer on one map, in any country
3. Prior work Occurrence databases and assessment reports, transcribed by hand Historic holes, intercepts, end-of-hole depths and reports
4. Land status Claim registries such as MLRS and GESTIM Claims, owners, royalty holders and earn-in partners, with ground alerts
5. Target areas and field plan Weighted overlay in a GIS, QField Target areas from host rock, structure, geophysics and open ground

Deposit model

Start with the deposit model you're testing, because the model describes the host rocks, structure, geophysical signature and pathfinder elements, and you compile a layer for each. For a porphyry copper model you look for intrusions in a magmatic arc, a weak magnetic high over the potassic zone with a low over sericitic alteration (USGS SIR 2010-5070-B), and a Cu-Mo-Au-Ag centre with a Pb-Zn-As-Sb halo in the geochemistry (USGS Bulletin 1693).

The usual references are published descriptive models such as Cox and Singer's Mineral Deposit Models (USGS Bulletin 1693, 1986) and the USGS series Mineral Deposit Models for Resource Assessment. The GeoTheories deposit-type pages describe porphyry copper, orogenic gold, Carlin-type gold, epithermal, IOCG, skarn and Witwatersrand gold, with the host rocks, alteration, pathfinders and geophysical signature for each.

GeoTheories classifies every occurrence in one deposit-type schema. You build the thesis, such as "Carlin-type gold in lower-plate carbonate under thin gravel cover", and agents walk it through every layer on your ground. You can test unlimited theses.

Geology, geophysics and geochemistry

Next, compile the geology and structure, the magnetic and gravity grids, and the rock, soil and stream-sediment geochemistry for the ground. The usual sources are Macrostrat for a merged geological map, survey portals such as the NRCan Geophysical Data portal for Canada's aeromagnetic, gravity and radiometric surveys, and each state or provincial survey's downloads (free portals by country). You load them into QGIS or ArcGIS Pro, reproject and style each layer, and repeat the work for every new jurisdiction.

GeoTheories compiles the geology, geophysics, geochem, satellite alteration, mine records, drill holes, filings and claims for your ground on one map. It standardizes the rock names from decades of logs and reports to one lithology schema. Agents walk your thesis the same way in any country or mining district, including Yukon, the Athabasca Basin, Greenland, Argentina, Sweden and South Australia.

Prior work

Then find the mineral occurrences, old workings, historic drill holes and assessment reports for the ground, and the end-of-hole depths (each hole's final depth) of earlier programs. The USGS digitized prospect pits, mine shafts, adits and tailings from its historical topographic maps into USMIN, and provincial and state occurrence databases list the known showings (portals by country).

Assessment reports, such as BC's ARIS reports filed since 1947 and Western Australia's WAMEX open-file reports, record the drilling. They're PDFs (WAMEX lets you search the text of every scanned report), so you read each one and transcribe the collars, intercepts and end-of-hole depths by hand. With the end-of-hole depths you see whether earlier holes reached the target depth for your deposit model.

Each project page in GeoTheories shows the historic holes, past operators, intercepts, end-of-hole depths and assessment reports for the ground. You digitize PDF tables and scanned maps into layers, so you can overlay a drill table from an old report on the geophysics and claims.

Land status

Before the field visit, check whether the ground is open and who holds the claims around it. In the US you check federal mining claims in BLM's MLRS (it replaced LR2000), and in Quebec you check mining titles on GESTIM's interactive map. Other jurisdictions have their own registries, so for ground in two jurisdictions you search both.

GeoTheories shows the claims on the map with every project's owner, royalty or stream holder and earn-in partner. Switch on ground alerts and you get an email when a claim in your thesis area is staked, transferred, lapses or is 30 days from expiry.

Target areas and the field visit

Last, pick target areas where your model's host rock, structure and geophysical signature coincide with open ground, and plan the field visit to them. In ArcGIS Pro you can run the Weighted Overlay tool (it needs the Spatial Analyst extension), and in QGIS the Raster Calculator. In the field you can open the QGIS project on a phone or tablet in the free QField app.

In GeoTheories you overlay host rock, structure, geophysics and open ground to find target areas, and agents build out your thesis from the deposit model and then walk it through every layer on each one. On a Team plan up to 5 people share every thesis, so everyone planning the visit reads the same findings.

Geotechnical and environmental desk studies

Geotechnical engineers and environmental consultants use many of the same records in a desk study, including geology, faults, old workings, mine records and historic boreholes, to assess abandoned-mine hazards and ground conditions before a ground investigation (land stability guidance, LCRM).

In England, the government's planning guidance on land stability says a land stability risk assessment normally comprises a comprehensive desk study and site inspections, and it lists British Geological Survey borehole records and Coal Authority mining records as sources. The Environment Agency's LCRM desk study checklist for land contamination includes site history, geology with faults, hydrogeology, coal or other mining hazards and previous investigations.

On coalfield sites in the Development High Risk Area, most planning applications need a Coal Mining Risk Assessment. It assesses mine entries, shallow workings, coal seam outcrops and mine gas from mine abandonment plans, geological data and historic maps. In Ohio, the Department of Transportation's manual for abandoned underground mines has the district engineer review mine maps, geologic structure maps and subsidence records before the field inspection.

GeoTheories compiles the geology, faults, old workings, mine records and historic drill holes for a site.

GeoTheories for the desktop study

In GeoTheories, agents walk your thesis through the geology, geophysics, geochem, satellite alteration, mine records, drill holes, filings and claims on your ground. When you write up the property for a technical report, the report builder drafts cited NI 43-101 Items 4 to 10 and 23 (property, access, history, geology, deposit types, exploration, drilling and adjacent properties) and the matching JORC and S-K 1300 sections for the QP to sign.

Solo is $299 a month or $2,499 a year, and Team is $699 a month or $5,849 a year for up to 5 people sharing every thesis. You buy either plan at self-serve checkout.

FAQ

What is a desktop study in mineral exploration?

It's the office review of the geology, geophysics, geochemistry, prior work and land status on a property before fieldwork, so you can pick the target areas to visit. Prospectors, project generators and companies also run one before they stake, option or buy ground.

What does a geotechnical desk study include?

A geotechnical desk study for land stability is a review of the existing geological and mining records, such as British Geological Survey borehole records and Coal Authority mining records in England (land stability guidance). For land contamination, the Environment Agency's LCRM checklist also includes site history, faults, hydrogeology, mining hazards and previous investigations.

What is the difference between a desk study and a site investigation?

In a desk study you review existing records, and in a site investigation you collect new data on site, such as boreholes and samples. In the Environment Agency's LCRM guidance, the desk study and site walkover form the preliminary investigation, before any intrusive site investigation.