Research/Deposit model

Placer deposits

Placers are concentrations of gold, platinum-group metals, tin, titanium minerals, zircon and diamonds that running water, waves or wind have sorted out of eroded rock and left in gravel or sand.1,3,4,5

The richest gold placers sit on bedrock or on a clay layer at the base of the gravel, in traps such as riffles, potholes and fractures that cross the old stream flow.1,5,6

Beach and dune heavy-mineral sands along passive-margin coastlines are much larger than stream placers and are a main source of titanium feedstock and the main source of zircon.4

Origins

Say placer PLASS-er. The word comes from American Spanish placer, which means a sandbank and a place where people wash surface detritus for gold (Wiktionary).

Placers are secondary deposits. Weathering and erosion free gold from a lode, and running water carries it off as dust, flakes, grains and nuggets and concentrates it by gravity (USGS). Gold placers commonly come from hydrothermal veins, orogenic and epithermal among them, and less often from porphyry and skarn (Levson 1995). PGE placers derive from zoned Alaskan-type ultramafic complexes, tin placers from evolved granites, and alluvial diamonds from kimberlite pipes that can lie 1,000 km upstream (USGS models 39b, 39d and 39e). The best-known placer is the Witwatersrand in South Africa, which most geologists read as a paleoplacer (an ancient placer since lithified into conglomerate), and its reefs have produced about one-third of all the gold ever mined (Frimmel 2019).

Gold fineness and the Hg and Cu in the grains match a placer to its lode, grain size decreases away from the source, and the coarse, angular grains lie closest to it (Levson 1995). Nuggets also lose silver with distance downstream (USGS model 39a).

Hydraulic sorting

Density controls the sorting. Gold's specific gravity runs from about 15 to 19.3 depending on purity, against 2.65 for quartz (Tourtelot 1968, USGS), so gold drops out first wherever the current slows. That happens on the inside of meanders, below rapids and falls and beneath boulders, at confluences and in the flow separation around bars (USGS model 39a, Levson 1995). Bedrock cleavage, joints and bedding that cross the flow act as natural riffles, and a clay bed or dense till inside the gravel, which miners call a false bottom, can hold a paystreak of its own (Levson 1995).

Hydraulic equivalence explains why fine gold travels with much coarser light grains. Grains with the same settling velocity deposit together, so gold spheres of about 0.0003 to 0.8 mm settle with quartz of 0.001 to 8 mm, and a gold flake 30 times wider than it's thick settles at an eighth of the speed of a gold sphere of the same diameter (Tourtelot 1968). That's why nuggets stay in steep channels and flour gold settles in the distal reaches of a stream (Levson and Giles 1995).

Floods, terraces and benches

Most concentration happens during floods, because gold moves down toward bedrock at high water, when the whole bed load of sand, gravel and boulders is moving (USGS). In the Klondike's White Channel gravel, a Pliocene to early Pleistocene braid-plain deposit, the gold concentrated where flow converged in shallow channels at peak discharge (Yukon Geological Survey). The more economic placers often took several cycles of erosion and deposition to form (Levson 1995).

When a stream cuts down, its older gravel stays behind on benches above the new channel. Erosional remnants of the White Channel gravel lie on rock-cut benches above the modern Klondike creeks, and gold eroded from it is the likely source of the gold in the younger creek gravels (Yukon Geological Survey). More than 30,000 miners hand-mined the rich creek beds during the gold rush, and companies then brought in hydraulic mining and dredges for gravel too costly to hand-mine (Parks Canada).

Paleochannels and paleoplacers

Volcanism, glaciation, stream capture and rising base level can bury a whole channel (Levson and Giles 1995). In California's Sierra Nevada, rhyolite flows and andesitic tuffs buried the gold-bearing Tertiary river gravels, and the canyons that rivers have cut since then expose the old channels high above the present ones. The forty-niners worked the present streams first, then traced the gold to those Tertiary channels and to their source quartz veins (Lindgren 1911, USGS). At Ballarat in Victoria, basalt flows buried Oligocene to Miocene river gravels, the deep leads, and miners sank shafts through up to 150 m of basalt and alluvium to reach them (Geological Survey of Victoria).

Older placers lithify into conglomerate, and few are left because erosion removes most of them from high-relief land (Levson and Giles 1995). The Witwatersrand is the exception, a Mesoarchaean basin that has produced about 53,000 t of gold, about one-third of all the gold ever mined (Frimmel 2019). Geologists still argue over its origin. Barnicoat and others interpret the gold as hydrothermal (Nature, 1997), while Frimmel's modified-paleoplacer reading has microbially fixed gold that rivers reworked into the conglomerates and that later fluids moved only short distances (Frimmel 2019).

Commodities and districts

The major placer gold districts include the Klondike, Russia's Yana-Kolyma belt and New Zealand's Westland (Levson 1995), California's Sierra Nevada and Victoria (USGS model 39a), and Otago, where the rush began at Gabriels Gully in 1861 (NZ Petroleum and Minerals). In Siberia's Lena province, placers supplied most of the gold, and as they deplete, lode deposits supply a growing share of production (Chugaev 2024). Platinum-group metals come from placers in the Urals, at Goodnews Bay in Alaska, and in Colombia's Chocó (USGS model 39b).

Cassiterite placers form the Southeast Asian tin fields, and economic tin placers generally lie within 8 km of their source, with the richest almost on top of it (USGS model 39e). Alluvial gravels yield most of Sierra Leone's diamonds (USGS) and hold an estimated 40 million carats in Guinea (USGS). Sri Lanka's sapphire, ruby, spinel and garnet come mostly from illam, the alluvial gem gravel (Zwaan 1982, Gems & Gemology), and Montana's secondary sapphire deposits include placers at Rock Creek, Dry Cottonwood Creek and the upper Missouri River (Hsu and others 2017, Gems & Gemology). Shoreline heavy-mineral sands are a main source of titanium feedstock and the main source of zircon (Van Gosen and others 2014, USGS).

Recovery and economics

Placer gold is already free of its host rock, so gravity alone recovers it in pans, rockers and sluices (USGS). A hard-rock mine has to break vein ore out of solid rock (National Park Service) and often recovers the gold from low-grade ore with cyanide (USGS). So placers are often a district's first gold production, and small crews still work them. T. A. Rickard wrote in 1909 that placer mining needed "no capital, save muscle" (National Park Service), and between 1998 and 2002, one- and two-person Klondike crews fed excavated pay gravel through wash plants and sluices, and some finished the cleanup on a jig (Yukon Geological Survey).

Hydraulic mining washed down whole gravel banks with jets of water (Lindgren 1911), and in California its debris flooded farms and silted the Sacramento River to San Francisco Bay until Judge Lorenzo Sawyer's ruling of 7 January 1884 in Woodruff v. North Bloomfield barred dumping tailings into the Yuba River and ended large-scale hydraulic mining in California (California State Parks). Dredges then worked the valley floors and recovered nearly $7.5 million in Sierra Nevada gold in 1908 (Lindgren 1911). At most a dozen dredges worked the Klondike creeks at once, and the last shut down in 1966. Dredge No. 4, from 1912, is the largest wooden-hulled bucket-line dredge in North America (Parks Canada). Malaysia's onshore dredges produced over half its tin in the 1950s, and the largest marine tin placers lie off Bangka and Belitung in Indonesia (Sutphin and others 1990, USGS), where PT Timah took 65 percent of its 2022 tin from offshore (USGS). Off Namibia, Debmarine's offshore operations produced about 70 percent of Namdeb Holdings' 1.9 million carats in 2014 (USGS).

Grades are low and erratic, most deposits sit below the water table, and environmental rules limit many of them because they lie in or beside active streams (Levson 1995). Buried channels add thick overburden and high stripping ratios (Levson and Giles 1995).

Prospectors often trace placers upstream to the lode. Almost all of the Fairbanks district's 275 t of gold from 1902 to 1998 came from placers, and in the 1980s bismuthinite-gold nuggets in sluices on Monte Cristo Creek, which drains Fort Knox, led prospectors to the deposit, which has been in production since 1997 (Bakke and others 1998).

Evaluation

The nugget effect makes placer sampling hard, because one gold particle in or out of a sample shifts the grade (Yukon Geological Survey). Precision depends on the number of gold particles in a sample, with 20 enough for most work, so sample size has to rise with grain size and fall with grade (Clifton and others 1969, USGS). That's why coarse gold at placer grades needs bulk samples, and paystreaks that run thin (under 2 m), lens-shaped and discontinuous need close-spaced sampling (Levson and Giles 1995).

A Yukon review of placer drilling recommends standard churn drilling but finds no one technique best for every deposit (Yukon Geological Survey). Radioactive-tracer tests in Yukon gravel found no significant difference in gold recovery among fully cased normal-circulation, reverse-circulation and auger drills (Yukon Geological Survey).

Shallow seismic refraction and reflection outline paleochannel geometry and depth to bedrock, ground-penetrating radar images terrace placers with little clay, and resistivity, EM and magnetic surveys are useful at some sites (Levson 1995 and Levson and Giles 1995).

The placer model

Tectonic setting

  • Fine-grained, far-travelled placers on stable shields, platforms and plateaus with prolonged reworking5
  • Coarse placers in Mesozoic and Cenozoic accreted orogenic belts and arcs, often along major faults1,5,6

Host rocks

  • Alluvial gravel and conglomerate rich in white vein-quartz clasts, and less commonly sand1
  • Well-sorted sand and rounded, imbricated, clast-supported gravel5

Alteration

  • Iron and manganese oxide coatings in the gravel5,6
  • Silver-depleted rims on gold grains thicken with age5

Ore minerals

  • Native gold, platinum-iron and osmium-iridium alloys1,3
  • Cassiterite, with ilmenite, zircon, monazite, xenotime and columbite by-products3

Pathfinder elements

  • Ag, As, Hg, Sb, Cu, Fe and S with gold placers1
  • Plus Cr in PGE placers3

Geophysical signature

  • Gamma-ray thorium highs over monazite-bearing heavy-mineral sands, weak where monazite is scarce or the sand is buried2,4
  • Induced-polarization response from ilmenite2,4

Grade and tonnage

  • Placer Au-PGE grade-tonnage model (65 mostly Quaternary alluvial placers)1
  • Shoreline placer Ti grade-tonnage model (61 mining units)2

Example deposits

DepositCountryNotes
Klondike5,7Canadafluvial gold
Goodnews Bay3,5,7United StatesPGE placer, Alaska
Richards Bay2,4South Africadune heavy-mineral sands, Ti-Zr
Sundaland tin belt5Thailand, Malaysia, Indonesiaalluvial tin
Orange River7Namibiaalluvial diamonds

Test your placer thesis

Agents walk your placer thesis through the lode sources upstream, the terrace and bench gravels, the depth to bedrock, the historic workings and drill holes, and the open ground.

Start a thesis →

Other deposit types

Guides

References

  1. Yeend, W.E., 1986, Descriptive model of placer Au-PGE (model 39a), and Orris, G.J., and Bliss, J.D., 1986, Grade and tonnage model of placer Au-PGE, in Cox, D.P., and Singer, D.A., eds., Mineral deposit models, U.S. Geological Survey Bulletin 1693
  2. Force, E.R., 1986, Descriptive model of shoreline placer Ti (model 39c), and Attanasi, E.D., and DeYoung, J.H., Jr., 1986, Grade and tonnage model of shoreline placer Ti, in Cox, D.P., and Singer, D.A., eds., U.S. Geological Survey Bulletin 1693
  3. Yeend, W.E., and Page, N.J, 1986, Descriptive model of placer PGE-Au (model 39b); Cox, D.P., 1986, Descriptive model of diamond placers (model 39d); Reed, B.L., 1986, Descriptive model of alluvial placer Sn (model 39e), in Cox, D.P., and Singer, D.A., eds., U.S. Geological Survey Bulletin 1693
  4. Van Gosen, B.S., Fey, D.L., Shah, A.K., Verplanck, P.L., and Hoefen, T.M., 2014, Deposit model for heavy-mineral sands in coastal environments, U.S. Geological Survey Scientific Investigations Report 2010-5070-L
  5. Levson, V.M., 1995, Surficial placers, BC mineral deposit profile C01, in Lefebure, D.V., and Jones, L.D., compilers, 2022, British Columbia Geological Survey mineral deposit profiles, GeoFile 2020-11
  6. Levson, V.M., and Giles, T.R., 1995, Buried-channel placers, BC mineral deposit profile C02, in Lefebure, D.V., and Jones, L.D., compilers, 2022, British Columbia Geological Survey mineral deposit profiles, GeoFile 2020-11
  7. Hofstra, A., and others, 2021, Deposit classification scheme for the Critical Minerals Mapping Initiative Global Geochemical Database, U.S. Geological Survey Open-File Report 2021-1049, Table 2