Research/Deposit model

Epithermal gold-silver deposits

Epithermal gold-silver deposits form within about 1,500 m of the water table at 300 °C or less, as veins, breccias and disseminated ore, mostly in volcanic and volcaniclastic rocks of about the same age.1,3

They are most common in subaerial volcanic arcs at convergent plate margins, and most known deposits are Cenozoic because erosion soon removes deposits this shallow.1

Low-, intermediate- and high-sulfidation deposits differ in ore minerals and alteration: adularia, illite and silica surround low- and intermediate-sulfidation veins, while high-sulfidation ore sits in vuggy silica with alunite and kaolinite.1,2,3

High-sulfidation deposits are often large, low-grade and disseminated, which suits open pits, while most low- and intermediate-sulfidation deposits are narrow, high-grade veins for underground mining.1,5

Many large lithocaps, blankets of vuggy silica and clay-altered rock, carry no gold, so a thick vuggy-silica intercept doesn't indicate gold grade.5

The epithermal model

Tectonic setting

  • Continental and island volcanic arcs along convergent plate margins1,3
  • Back-arc, continental rift, post-collisional extensional and transform-margin settings as well1

Host rocks

  • Andesite to rhyolite lava domes, flows, breccias and tuffs, and volcaniclastic and epiclastic strata1,2,3
  • Calc-alkaline andesitic volcanics host most low-sulfidation veins, and bimodal and alkalic suites host some3

Alteration

  • Low- and intermediate-sulfidation: silicification with adularia and illite next to veins, grading outward to argillic and propylitic rock1,3
  • Steam-heated acid alteration and silica sinter at and above the paleo-water table1,3

Ore minerals

  • Electrum, gold, acanthite (argentite), silver sulfosalts and selenides in low- and intermediate-sulfidation ore1,2,3
  • Sphalerite, galena and chalcopyrite in intermediate-sulfidation veins1,3

Pathfinder elements

  • Epithermal suite: As, Sb, Hg, Se, Te, Tl, Mo and W1
  • Pb, Zn, Cu and Mo, especially in intermediate-sulfidation deposits1

Geophysical signature

  • Magnetic lows where hydrothermal fluids destroyed magnetite in volcanic host rocks1,3
  • Resistivity highs over silicified rock and veins, and lows over sulfide-bearing zones1

Grade and tonnage

  • Deposits range from tens of thousands to more than 1 billion tonnes of ore at 0.1 to more than 30 g/t Au and less than 1 to several thousand g/t Ag1
  • Median of 41 Comstock-type bonanza Au-Ag deposits: 0.77 Mt at 7.5 g/t Au and 110 g/t Ag with minor Cu, Zn and Pb3

Example deposits

DepositCountryNotes
Comstock Lode2,3,4United StatesNevada, intermediate-sulfidation
Goldfield2,3,4United StatesNevada, high-sulfidation
Hishikari1,3Japanlow-sulfidation
El Indio2,3Chilehigh-sulfidation
Guanajuato1,2,3Mexicosilver-gold veins
Yanacocha1,5Peruhigh-sulfidation, alteration 16 km across
Fruta del Norte5Ecuadorintermediate-sulfidation, found by drilling under barren sinter
Cerro Vanguardia5ArgentinaJurassic low-sulfidation veins of Patagonia

Test your epithermal thesis

Agents walk your epithermal thesis through the volcanic hosts, the magnetic lows and resistivity highs over altered and silicified rock, the As-Sb-Hg pathfinders, the historic workings and holes, and the open ground.

Start a thesis →

Other deposit types

Guides

References

  1. John, D.A., Vikre, P.G., du Bray, E.A., Blakely, R.J., Fey, D.L., Rockwell, B.W., Mauk, J.L., Anderson, E.D., and Graybeal, F.T., 2018, Descriptive models for epithermal gold-silver deposits, chap. Q of Mineral deposit models for resource assessment: U.S. Geological Survey Scientific Investigations Report 2010-5070-Q
  2. Mosier, D.L., Singer, D.A., and Berger, B.R., 1986, Descriptive model of Comstock epithermal veins (25c), and Berger, B.R., 1986, Descriptive model of epithermal quartz-alunite Au (25e), in Cox, D.P., and Singer, D.A., eds., Mineral deposit models: U.S. Geological Survey Bulletin 1693
  3. Panteleyev, A., 1996, Epithermal Au-Ag-Cu: high sulphidation (profile H04) and Epithermal Au-Ag: low sulphidation (profile H05), in Lefebure, D.V., and Jones, L.D., compilers, 2022, British Columbia Geological Survey mineral deposit profiles, 1995 to 2012: BC Geological Survey GeoFile 2020-11
  4. Hofstra, A., and others, 2021, Deposit classification scheme for the Critical Minerals Mapping Initiative Global Geochemical Database: U.S. Geological Survey Open-File Report 2021-1049, table 2 (epithermal group rows)
  5. Jackson, A., c. 2011, Ore Deposits 101, Part 5: Epithermal Deposits (video)