Research/Method

Geophysical surveys in mineral exploration

Compare magnetic, gravity, EM, IP, radiometric and seismic surveys by property, depth, cost and deposit type, with line spacing, drones and deliverables.

Updated November 202613 min read

A geophysical survey measures a physical property of the rock, such as magnetization, density, electrical conductivity, chargeability or natural radioactivity, from an aircraft, on the ground or down a drill hole. In mineral exploration, magnetic and gravity surveys map rock types, faults and intrusions under cover, EM and IP surveys detect conductive and disseminated sulphides, radiometric surveys measure potassium, uranium and thorium at surface, and seismic surveys image layered rock at depth (USGS, Geoscience Australia). The USGS says geologic mapping, other geophysical data and subsurface information must constrain every interpretation (USGS porphyry copper model).

Survey methods

Survey Measures Depth Platform Relative cost Deposit types
Magnetic Magnetization, mostly from magnetite Surface to depth, with broader, gentler anomalies from deeper sources Airborne, drone and ground Low Porphyry, IOCG, skarn, epithermal, orogenic gold, Witwatersrand
Gravity Rock density Basins, plutons and faults at depth Ground stations, airborne gradiometry Low on the ground, high for airborne gradiometry IOCG, porphyry and skarn plutons, Witwatersrand
EM Electrical conductivity Several hundred metres airborne, several kilometres for AMT Airborne, ground and downhole Airborne EM costs more than magnetics and radiometrics Skarn, iron formation-hosted gold, epithermal, massive sulphide
IP and resistivity Chargeability and resistivity Set by the electrode array Ground and downhole Relatively high Porphyry, epithermal, skarn, Carlin-type
Radiometric Potassium, uranium and thorium Top 35 cm or so Airborne with magnetics, ground and downhole Low, flown with magnetics Porphyry, epithermal, IOCG, Witwatersrand, heavy-mineral sands
Seismic Travel times of reflected and refracted waves Tens of kilometres for reflection Ground and marine High Witwatersrand, porphyry, buried-channel placers

The relative costs are from the USGS (potential-field surveys are relatively inexpensive), Geoscience Australia (airborne EM costs more than magnetics and radiometrics), the Wyoming State Geological Survey (gravity gradiometry), the BC Geological Survey (IP) and Milkereit and others, 1996 (seismic).

Airborne, ground and drone surveys

Airborne surveys cover large areas quickly (USGS), IP and resistivity surveys need electrodes in the ground, and drones fly magnetics lower and on tighter lines than crewed aircraft. In a 2017 survey over an Ontario greenstone belt, a multirotor drone flew magnetics on 25 m lines at about 35 to 70 m above ground, against 100 m lines at about 85 m for the regional helicopter survey, and it covered ground faster than a walking survey (Walter and others, 2020).

Fixed-wing surveys over basins cost less than helicopter surveys in mountains (Wyoming State Geological Survey).

Magnetic surveys

Most airborne magnetometers measure the total intensity of the Earth's magnetic field, not its direction. Most sedimentary rocks aren't magnetic (USGS), and in most igneous rocks the magnetization comes almost entirely from magnetite (USGS epithermal model). A reduced-to-pole (RTP) grid corrects each anomaly for the inclination and declination at the survey site and centres it over its source, and derivative grids emphasize shallow sources and the edges of rock units and faults (USGS).

The USGS porphyry model predicts a weak magnetic high over the potassic core of a porphyry copper deposit, a low over the sericitic zone and rising intensity through the propylitic zone, so an ideal porphyry shows an annular magnetic low (USGS). Gold-rich porphyry ore with abundant magnetite can show as a high, IOCG deposits show regional aeromagnetic anomalies from magnetite and coeval igneous rocks, and iron skarns produce strong positive anomalies (BC Geological Survey).

Hydrothermal fluids can destroy magnetite, so intensely altered volcanic rock around epithermal deposits commonly shows as subdued zones on aeromagnetic maps (USGS). Carbonate alteration around orogenic gold veins also destroys magnetite and produces magnetic lows, and faults show as linear anomalies (BC Geological Survey). In the Witwatersrand Basin, ferruginous shales below the gold-bearing reefs produce magnetic highs along the basin margin, and magnetics images them to 1,000 m (USGS).

Gravity surveys

A gravity meter measures small changes in gravity from place to place, in milligals (mGal), and gravity values are higher over denser rock (USGS). Basin sediments usually produce gravity lows and mafic rocks gravity highs, so gravity outlines basins, buried intrusions and faults between rocks of different density (USGS).

Dense iron oxide gives IOCG deposits large positive gravity anomalies (BC Geological Survey), and Olympic Dam shows a local gravity high (USGS model 29b). Gravity outlines the pluton of a porphyry system where its density differs from the host rock (USGS). Airborne gravity and magnetics locate the plutons of gold skarns, and detailed gravity can delineate structural-block boundaries in low-sulphidation epithermal districts (BC Geological Survey). The Witwatersrand Basin shows a Bouguer high, and the less dense, gold-bearing Central Rand Group shows local lows near the basin edge (USGS). High-precision gravity can also show whether an EM conductor is low-density graphite or denser sulphide (USGS).

Gravity gradiometers, which measure the difference in gravity between two points very close together, fly on aircraft and satellites (Geoscience Australia), and airborne gravity can exceed the resolution of existing ground surveys (USGS).

EM surveys

An electromagnetic (EM) survey uses a changing magnetic field, from a transmitter or a natural source, to induce electrical currents in conductive ground, and a receiver measures the secondary field from those currents (USGS). Graphite, clays, sulphide minerals and saline groundwater all conduct (Geoscience Australia), and the USGS gives massive sulphide, graphite and saline water as less than 1 ohm-m against more than 1,000 ohm-m for igneous and metamorphic rocks (USGS).

Copper and iron skarns produce EM anomalies, and airborne and ground EM and magnetics detect the sulphide and magnetite in iron formation-hosted orogenic gold deposits (BC Geological Survey). Over epithermal systems, low-resistivity zones in airborne EM can indicate sulphide mineralization, and high-resistivity zones indicate silicification and veins (USGS).

Planes and helicopters fly airborne EM, and depending on the system and the geology it resolves conductivity to several hundred metres (Geoscience Australia).

IP and resistivity surveys

A resistivity survey injects current into the ground through one pair of electrodes and measures the voltage at another pair. An induced polarization (IP) survey on the same electrodes measures the chargeability, the rock's ability to hold an electrical charge, from how the voltage decays after the current stops (USGS). Both are ground methods, and the depth of investigation depends on the electrode array and the resistivity of the ground (USGS).

In a porphyry copper deposit, the strongest IP response comes from the quartz-sericite-pyrite (phyllic) zone, and the same zone produces resistivity lows (USGS).

Over epithermal deposits, resistivity rises over quartz veins and silicified rock and falls over clay and sulphide alteration, and at Pajingo in northeastern Australia it was an order of magnitude above background over the mineralized veins (USGS). The USGS calls controlled-source AMT (CSAMT) the electrical method of choice for epithermal exploration in many areas (USGS). Copper skarns produce IP anomalies, and some Carlin-type deposits show resistivity lows (BC Geological Survey).

Radiometric surveys

A gamma-ray spectrometer counts gamma rays from the decay of potassium, uranium and thorium and estimates the concentration of each element near the surface (Geoscience Australia). Gamma rays travel about 35 cm through rock (Geoscience Australia), so the signal comes from roughly the top 35 cm and weakens under soil and vegetation (USGS Witwatersrand model, USGS epithermal model), and an airborne reading averages the concentration over an area of ground (USGS).

Potassium alteration accompanies many hydrothermal ore deposits (Geoscience Australia), and the USGS lists radiometrics with magnetics and IP as the most important geophysical methods for porphyry copper (USGS). Magnetic lows with high K/Th ratios can outline the potassic alteration of low- and intermediate-sulphidation epithermal deposits (USGS), and IOCG deposits show radiometric anomalies where they carry uranium or potassium alteration (BC Geological Survey).

Uranium-rich Witwatersrand conglomerates show in radiometric data where the host rocks crop out, and geologists have used downhole radiometric logs across the basin to correlate the stratigraphy and locate the gold- and uranium-bearing reefs (USGS). Monazite gives shoreline heavy-mineral sand placers gamma anomalies (USGS model 39c).

Aircraft often fly radiometrics with magnetics (Geoscience Australia), and spectrometers also work on the ground and down drill holes (USGS).

Seismic surveys

A seismic survey records the travel times of seismic waves reflected or refracted at contacts between rock layers, and the strength of a reflection depends on the acoustic impedance contrast across the contact (USGS). Reflection surveys map geology to tens of kilometres, refraction surveys reach shallower depths, and both work best in sedimentary basins with continuous, near-flat layers (USGS). Geoscience Australia runs reflection surveys on land and at sea, and it calls seismic the principal method in Australia for imaging the crust at depth (Geoscience Australia).

Explorers in the Witwatersrand Basin have used seismic routinely since the 1980s, and early 3D reflection surveys in the Klerksdorp and Welkom gold fields mapped the Ventersdorp Contact Reef at depths of 1,000 to 3,500 m (USGS). Seismic images the marker beds and the faults offsetting them, and it doesn't detect the gold directly (USGS). In porphyry districts, reflection seismic has mapped the shape of batholiths and the leached caps over deposits (USGS), and over buried-channel placers, shallow refraction and reflection outline the paleochannel and the depth to bedrock (BC Geological Survey).

Downhole surveys

Downhole EM measures the EM response down a drill hole, and the BC Geological Survey says borehole EM has proven successful on massive sulphide lenses (BC Geological Survey).

Survey design

Shallow sources need closer line spacing. The USGS ranks an aeromagnetic survey in its top class when the terrain clearance is 152 m or less and the line spacing is no more than twice the shallowest source depth, measured from the magnetometer (terrain clearance plus any non-magnetic cover), and it calls 1:1 ideal, with 2:1 enough where the sources are elongated perpendicular to the flight lines (Drenth and Grauch, 2019). So fly lines across the strike of the geology, and set the spacing from the terrain clearance plus the depth of the shallowest source you need to map.

The USGS survey of northwestern New York (2023 to 2024) used north-south flight lines 250 m apart, east-west tie lines every 2,500 m, a nominal 100 m terrain clearance and about 38,500 line kilometres of magnetic and radiometric data from a fixed-wing aircraft (USGS).

Processing and deliverables

Ask the contractor for the located line data, the grids and a survey report. The USGS New York survey delivered flight-line data, Geosoft databases and grids, and a report on survey parameters, field operations, quality control and data reduction (USGS).

Survey Standard products
Magnetic Total magnetic intensity, reduced-to-pole and derivative grids
Gravity Bouguer and complete Bouguer anomaly grids
Radiometric Potassium, uranium and thorium grids
Airborne EM Conductivity depth sections, depth-slice grids and point-located conductivity
Downhole EM Raw field data, an interpretation report with plots and sections, and modelled conductor plates

The products come from the USGS magnetics and gravity fact sheets, Geoscience Australia's radiometrics and AEM pages and the WA co-funded drilling guidelines.

Contractors and cost

Airborne contractors price surveys by the flight-line kilometre, which the line spacing sets, and the cost per kilometre is lower on a larger survey because mobilization is a smaller share of the total (Wyoming State Geological Survey).

Fugro and Xcalibur Multiphysics flew the USGS New York survey (USGS), and Geotech flies helicopter time-domain EM (VTEM and HTEM), ZTEM and fixed-wing and helicopter magnetics and radiometrics (Geotech). Geotech's site lists no rates, so request quotes on the same line kilometres, spacing, clearance and deliverables.

Surveys in company releases

Geophysical survey results count as Exploration Results under the JORC Code, and the Competent Person reports any meaningful and material survey results, plus the instrument make and model, reading times and calibration factors wherever a geophysical tool, such as a downhole gamma sonde, determines an assay (JORC Code 2012). NI 43-101 requires a summary of the material results, their interpretation and the QA/QC applied (NI 43-101, section 3.3), and a technical report gives the survey procedures and parameters, the spacing and area covered, and separates the issuer's own work from any earlier operators' results (Form 43-101F1, Item 9).

Run these five checks before you buy a stock because of a geophysical anomaly:

  • Who flew or ran the survey, and when?
  • What were the line spacing and survey height? Before 1990 most Australian government surveys used lines 1,500 m or more apart, against 400 m or less since (Geoscience Australia).
  • Which grid does the figure show? TMI, RTP and derivative images of the same data look different, and a vertical derivative emphasizes shallow sources (USGS).
  • Does the geology explain the anomaly without ore? Shale and graphite conduct like massive sulphide, pyrite and chalcopyrite are difficult to distinguish, and an infinite set of source bodies fits any magnetic or gravity anomaly (USGS).
  • Have earlier holes tested the anomaly, and what were their end-of-hole depths?

Public survey data

The USGS publishes merged magnetic anomaly grids for North America and detailed aeromagnetic surveys by state or county, in ArcGIS, Geosoft, GXF and XYZ formats, and Earth MRI adds new airborne surveys. NRCan's Canadian Airborne Geophysical Data Base holds aeromagnetic, airborne EM, gravity and radiometric surveys and compilations under the Open Government Licence - Canada, and you search it by province, NTS sheet or a drawn area (Geophysical Data portal).

Geoscience Australia's national radiometric grids merge more than 600 surveys at 100 m resolution (Geoscience Australia), and its AusAEM program has flown airborne EM at 20 km line spacing since 2017 (Geoscience Australia).

To reprocess flight-line data or invert a survey, you need geophysics software such as Oasis montaj, INTREPID or SimPEG (geophysics software compared).

GeoTheories for interpretation

In GeoTheories, you interpret each anomaly against the mapped geology, structure, historic holes and claims in any country, with processed magnetic and gravity grids (total magnetic intensity, reduced to pole, Bouguer and isostatic residual) on the same ground.

Agents build out your thesis from the deposit model and then walk it through the geology, geophysics, geochem, satellite alteration, mine records, drill holes, filings and claims on that ground, and they check it against the geophysical signature in your deposit model, such as the annular magnetic low of a porphyry or the gravity and magnetic highs of an IOCG. You overlay host rock, structure, geophysics and open ground to find target areas, and you digitize scanned geophysics maps from old reports into layers.

Each project page shows the historic holes, intercepts and end-of-hole depths on the ground, so you see whether earlier operators drilled the anomaly in a release and how deep they stopped. Solo is $299 a month or $2,499 a year, Team is $699 a month or $5,849 a year for up to 5 people, through self-serve checkout.

FAQ

What is the difference between a magnetic survey and a gravity survey?

A magnetic survey measures rock magnetization, mostly from magnetite, and a gravity survey measures rock density (USGS magnetics, USGS gravity). Both are potential-field methods, relatively inexpensive and quick over large areas, and together they help locate faults, basins and buried intrusions.

What does induced polarization measure?

Induced polarization measures chargeability, the ability of rock to hold an electrical charge, from the voltage decay after the survey current switches off (USGS). IP suits disseminated sulphides, and geophysicists first developed it to explore for porphyry copper and still commonly use it on porphyry targets (USGS).

How deep do geophysical surveys reach?

It depends on the method. Radiometrics measures roughly the top 35 cm (Geoscience Australia), magnetics imaged the Witwatersrand's ferruginous shales to 1,000 m and reflection seismic maps geology to tens of kilometres (USGS). Airborne EM resolves conductivity to several hundred metres (Geoscience Australia), and AMT has mapped base metal deposits down to several kilometres (USGS).

Can geophysics find gold?

Geophysics rarely detects gold itself, and the USGS says gold concentrations in epithermal deposits are too low to detect at the surface (USGS), so surveys detect the magnetite, sulphides, alteration, faults and host rocks of each deposit type. GeoTheories agents check your thesis against that geophysical signature.

Where is free geophysical survey data available?

National surveys publish it for free, including the USGS magnetic grids for North America, NRCan's Geophysical Data portal and Geoscience Australia's national magnetic, radiometric and AEM data (portals by country).

How much does a geophysical survey cost?

Airborne contractors quote by the flight-line kilometre, so the cost scales with the area, line spacing, terrain and method. A 2022 Wyoming State Geological Survey proposal estimated about US$20 million for statewide magnetic and radiometric coverage at about 200 m spacing and about US$200 million with airborne EM and gravity gradiometry added, and the USGS scheduled a US$500,000 survey of the Medicine Bow Mountains and part of the Sierra Madre for 2022 (Wyoming State Geological Survey).

What line spacing does a magnetic survey need?

The USGS's top survey class keeps the line spacing no more than twice, and ideally equal to, the distance from the magnetometer to the shallowest sources (terrain clearance plus non-magnetic cover), with terrain clearance of 152 m or less (Drenth and Grauch, 2019). The USGS flew northwestern New York on 250 m lines at 100 m clearance (USGS), and a drone survey in Ontario flew 25 m lines (Walter and others, 2020).