Research/Deposit model

Banded iron formation (BIF) deposits

Banded iron formation is chemical sediment of centimetre-scale chert or quartz bands alternating with hematite, magnetite or siderite bands, and Superior-type BIF carries 15 percent Fe or more.1,2

Superior-type BIF is mostly Early Proterozoic, on stable shelves and in intracratonic basins, while Algoma-type is mostly Archean, with submarine volcanics in arcs and at spreading ridges.1,2,3

Superior-type BIF hosts the largest iron deposits and is the source rock for most of the world's iron ore resources.2

Ore is either BIF coarsened enough by metamorphism to beneficiate, or direct-shipping ore where weathering leached out the silica.1,2

The USGS median of 66 Algoma and Superior deposits is about 170 Mt at about 53 percent Fe, and about one in ten exceeds 2,400 Mt.1

The BIF model

Tectonic setting

  • Superior type: shelves and intracratonic basins on craton margins, now commonly preserved in Proterozoic orogenic forelands1,2
  • Algoma type: submarine volcanic belts in arcs and at spreading ridges, mostly in Archean greenstone belts1,3

Host rocks

  • Quartzite, shale, black shale, dolomite and quartz arenite interbedded with Superior-type iron formation1,2
  • Mafic to felsic submarine volcanic rocks, pillowed greenstone and deep-water clastic sediments with Algoma-type iron formation1

Alteration

  • No ore-related alteration, but metamorphic grain coarsening decides whether the rock can be beneficiated1,2
  • Supergene enrichment to hematite and iron hydroxides, with silica leached1

Ore minerals

  • Hematite, magnetite, goethite and siderite with chert or fine-grained quartz1,2
  • Pyrolusite, manganite and hollandite in Mn facies, which can exceed 3 percent Mn2

Pathfinder elements

  • Fe and Mn, and high P with low Al and Mn in the Rapitan type area2
  • Oxide facies normally carries low Na, K, S and As, which are deleterious in processing2

Geophysical signature

  • Linear aeromagnetic anomalies outline magnetite-bearing iron formation1,2
  • Gravity with magnetics traces BIF and enriched ore, and EM and resistivity trace Algoma-type beds2,3

Grade and tonnage

  • Algoma and Superior deposits, 66 combined: about 11, 170 and 2,400 Mt at the 90th, 50th and 10th percentiles, with about 30, 53 and 66 percent Fe1
  • Economic grades of 25 to over 45 percent Fe in under 10 to over 1,000 Mt, and the Crest (Rapitan type) resource is 5,600 Mt at 47.2 percent Fe2

Example deposits

DepositCountryNotes
Hamersley iron province4AustraliaWestern Australia, Superior type
Mesabi Range1,2,4United StatesMinnesota, Superior type
Labrador Trough2,4CanadaQuebec and Labrador, Superior type
Carajás1,3,4BrazilPará, Brazil
Crest2CanadaMackenzie Mountains, Rapitan type

Test your BIF thesis

Agents walk your thesis through the geology, geophysics, drill holes, reports and claims. Overlay host rock, structure, geophysics and open ground to find target areas.

Start a thesis →

Other deposit types

Guides

References

  1. Cannon, W.F., 1986, Descriptive models of Algoma Fe (model 28b) and Superior Fe (model 34a), and Mosier, D.L., and Singer, D.A., 1986, Grade and tonnage model of Superior Fe and Algoma Fe deposits, in Cox, D.P., and Singer, D.A., eds., Mineral deposit models: U.S. Geological Survey Bulletin 1693
  2. Gross, G.A., 2000, Iron-formation, Lake Superior and Rapitan types (profile F10), in Lefebure, D.V., and Jones, L.D., compilers, 2022, British Columbia Geological Survey mineral deposit profiles, 1995 to 2012: BC Geological Survey GeoFile 2020-11
  3. Gross, G.A., 1996, Algoma-type iron-formation (profile G01), in Lefebure, D.V., and Jones, L.D., compilers, 2022, British Columbia Geological Survey mineral deposit profiles, 1995 to 2012: BC Geological Survey GeoFile 2020-11
  4. Hofstra, A., Lisitsin, V., Corriveau, L., Paradis, S., Peter, J., and others, 2021, Deposit classification scheme for the Critical Minerals Mapping Initiative Global Geochemical Database: U.S. Geological Survey Open-File Report 2021-1049, Table 2 (iron formation rows: Superior-type and Algoma-type banded iron formation)