Graphite deposits
Natural graphite is mined from three deposit types: disseminated flake in high-grade metasediments, microcrystalline (amorphous) graphite in metamorphosed coal, and lump or chip graphite in veins.1,2
Flake graphite forms from carbonaceous sediment metamorphosed at amphibolite facies or higher, and aluminous paragneiss, quartzite and marble in upper amphibolite to granulite terrains are the best hosts.1,2
Flake deposits typically grade about 8 to 15 percent carbon, and most mines carry at least 8 to 12 percent graphitic carbon in more than 0.5 Mt.1
Graphite is conductive where flakes touch, so EM methods are the effective tool for high-grade zones.2
Flake size and purity set concentrate price, and weathering of the gangue makes ore easier to mine.1,2
The graphite model
Tectonic setting
- Flake: upper amphibolite to granulite belts in mostly Precambrian basement, originally organic-rich intracratonic or continental margin basins1,2
- Microcrystalline: coal basins graphitized by intrusions or regional metamorphism1,2
Host rocks
- Paragneiss, quartzite and marble, commonly richest at marble-paragneiss contacts and thickest in fold crests1,2
- Metamorphosed coal seams in schist, phyllite, quartzite and metagreywacke1,2
Alteration
- Mostly no alteration halo, with retrograde chlorite, prehnite, zoisite and clinozoisite in marble-hosted flake ore2
- Hornfels around the intrusions that graphitized coal, and narrow sillimanite or tourmaline selvages on some veins1,2
Ore minerals
- Crystalline flake graphite, 40 µm to 4 cm across and generally 1 cm or less1
- Microcrystalline graphite under 4 µm in amorphous deposits, and coarse interlocking crystalline graphite in veins1
Pathfinder elements
- Graphite flakes in residual soil and stream sediment2
Geophysical signature
- Airborne and ground EM, VLF, IP, SP and resistivity anomalies where flakes touch2
- Ground EM and resistivity locate large veins, and mise-à-la-masse delineates them2
Grade and tonnage
- Flake ore generally 5 to 30 percent carbon in 0.1 to 100 Mt, amorphous ore 50 to 90 percent carbon in 0.1 to 500 Mt, and vein ore 40 to 90 percent carbon1
- Disseminated flake deposits: median 9.0 percent graphite and 2.4 Mt, and amorphous deposits average 4.9 Mt2
Example deposits
| Deposit | Country | Notes |
|---|---|---|
| Liu Mao1 | China | Heilongjiang, flake, 3 Mt at 18.5 percent carbon |
| Lac Knife1,2,3 | Canada | Quebec, flake, 4.9 Mt at 15.8 percent carbon |
| Kropfmühl1 | Germany | Bavaria |
| Sonora coal-graphite district1,2 | Mexico | amorphous graphite from metamorphosed coal |
| Bogala1,2 | Sri Lanka | vein (lump) graphite |
Test your graphite thesis
Agents walk your thesis through the geology, geophysics, drill holes, reports and claims. Overlay host rock, structure, geophysics and open ground to find target areas.
Other deposit types
Guides
References
- Robinson, G.R., Jr., Hammarstrom, J.M., and Olson, D.W., 2017, Graphite, chap. J of Schulz, K.J., DeYoung, J.H., Jr., Seal, R.R., II, and Bradley, D.C., eds., Critical mineral resources of the United States: U.S. Geological Survey Professional Paper 1802-J
- Simandl, G.J., and Kenan, W.M., 1999, Microcrystalline graphite (profile P03), Crystalline flake graphite (P04) and Vein graphite in metamorphic terrains (P05), in Lefebure, D.V., and Jones, L.D., compilers, 2022, British Columbia Geological Survey mineral deposit profiles, 1995 to 2012: BC Geological Survey GeoFile 2020-11
- Hofstra, A., Lisitsin, V., Corriveau, L., Paradis, S., Peter, J., and others, 2021, Deposit classification scheme for the Critical Minerals Mapping Initiative Global Geochemical Database: U.S. Geological Survey Open-File Report 2021-1049, Table 2 (metamorphic and orogenic graphite rows)