Research/Deposit model

Sediment-hosted copper deposits

Sediment-hosted stratabound copper deposits are disseminated chalcocite, bornite and chalcopyrite in reduced shale, siltstone, dolostone or sandstone on or within thick red-bed sequences, and supply about 20 percent of the world's copper.1,3

Warm (75 to 220 °C) oxidized brines carried copper, sourced typically within the red-bed package, and dropped it at pyrite, organic matter or sour gas, so ore zones from a hematitic front through chalcocite, bornite and chalcopyrite to pyrite.1,3

The USGS model splits them into reduced-facies, sandstone and red-bed types, and the first two reach tens of millions to more than a billion tonnes of ore, while red-bed deposits rarely reach 10 Mt.1

They are the world's main cobalt source and fourth among deposit types for silver, and the Kupferschiefer and the Central African Copperbelt hold 36 of the 47 known deposits with more copper than a median porphyry deposit.1

Reduced-facies ore is more commonly 1 to 15 m thick but runs for kilometres, the basal reduced unit above the red beds most often carries the highest grades, and places where reduced hosts onlap basement highs are particularly favourable ground.1,3

The sediment-hosted copper model

Tectonic setting

  • Intracontinental rifts, aulacogens and passive margins, mostly in the rift sag phase, with growth faults2,3
  • Red-bed basins laid down mostly within 20 to 30 degrees of the paleo-equator, in proto-oceanic rifts or as post-collisional molasse1,3

Host rocks

  • Gray to black shale, siltstone and carbonaceous dolosiltstone with organic matter and pyrite, the reduced-facies type of the Kupferschiefer and the Central African Copperbelt1
  • Gray sandstone that held petroleum or sour gas (sandstone type) and fluvial sandstone with plant debris (red-bed type), above or within red beds more than 300 m thick1

Alteration

  • Hematitic Rote Fäule on the upflow side of ore, extending tens to hundreds of kilometres in central Europe1
  • Green, white or gray reduced zones in red beds, with authigenic K-feldspar, and quartz and dolomite replacing anhydrite in Zambian and Congolese ore1,2,3

Ore minerals

  • Chalcocite and bornite in the ore zones, grading outward through chalcopyrite to pyrite, with hematite on the upflow side1,3
  • Carrollite for cobalt in the Central African Copperbelt, native copper and native silver in some deposits, and galena and sphalerite at the fringes1,2,3

Pathfinder elements

  • Cu, Ag, Pb, Zn and Cd in host rocks, sometimes with weaker Hg, Mo, V, U, Co and Ge2,3
  • Sb, As, Ba, Mn, Hg and Re in zones around ore, and Au, Pt and Pd along the footwall of the Kupferschiefer ore in Poland1

Geophysical signature

  • Gravity, magnetics and seismic map basin geometry, basement horsts and faults, and microgravity picks out salt structures1
  • IP finds disseminated sulfide in resistive host rocks, as at Spar Lake1

Grade and tonnage

  • Outside the Central African Copperbelt, reduced-facies deposits average 1.38% Cu, sandstone deposits 1.08% and red-bed deposits 2.09%, and Copperbelt reduced-facies deposits average 2.59% Cu1
  • The average deposit is about 22 Mt at 2.1% Cu and 23 g/t Ag, and about 20 percent of deposits average 0.24% Co3

Example deposits

DepositCountryNotes
Lubin-Sieroszowice (Kupferschiefer)1,3PolandReduced-facies, 3,612 Mt at 1.99% Cu and 57.5 g/t Ag
Kolwezi Klippe (Kamoto)1,2,3Democratic Republic of the CongoCentral African Copperbelt, 1,200 Mt at 4.5% Cu and 0.40% Co, the largest known cobalt resource
Udokan1RussiaTransbaikalia, the largest known sandstone-type deposit, 1,528 Mt at 1.45% Cu and 12.6 g/t Ag
White Pine1,2,3,4United StatesMichigan, Nonesuch Shale, one ore layer 1 to 7 m thick over 50 km²
Spar Lake (Troy)1,3United StatesMontana, Revett Formation sandstone, 80.6 Mt at 0.63% Cu and 46 g/t Ag

Test your sediment-hosted copper thesis

Agents walk your thesis through the geology, geophysics, drill holes, reports and claims. Overlay host rock, structure, geophysics and open ground to find target areas.

Start a thesis →

Other deposit types

Guides

References

  1. Hayes, T.S., Cox, D.P., Piatak, N.M., and Seal, R.R., II, 2015, Sediment-hosted stratabound copper deposit model: U.S. Geological Survey Scientific Investigations Report 2010-5070-M
  2. Cox, D.P., 1986, Descriptive model of sediment-hosted Cu (model 30b), in Cox, D.P., and Singer, D.A., eds., Mineral deposit models: U.S. Geological Survey Bulletin 1693
  3. Lefebure, D.V., and Alldrick, D.J., 1996, Sediment-hosted Cu-Ag-Co (profile E04), in Lefebure, D.V., and Jones, L.D., compilers, 2022, British Columbia Geological Survey mineral deposit profiles, 1995 to 2012: BC Geological Survey GeoFile 2020-11
  4. Hofstra, A., and others, 2021, Deposit classification scheme for the Critical Minerals Mapping Initiative Global Geochemical Database: U.S. Geological Survey Open-File Report 2021-1049, table 2 (sediment-hosted copper row)