Sedimentary exhalative (SEDEX) deposits
SEDEX deposits are layers of zinc-lead-silver sulfide in black shale and siltstone, deposited on or just below the sea floor of a fault-bounded, euxinic marine basin.1,2,3
Basin brines at about 100 to 200 °C rose along the faults bounding second-order basins and precipitated their metals where they mixed with hydrogen sulfide in organic-rich mud.1,3
Deposits are large, with a USGS median of 15 Mt at 5.6% zinc and 2.8% lead, and one deposit in ten exceeds 130 Mt.2,3
Most formed in two periods, about 1.8 to 1.4 billion years ago and 550 to 300 million years ago, and several deposits commonly share one stratigraphic interval along the same fault system.1
SEDEX deposits are much rarer than VMS deposits, but they are generally larger and richer, and they supply a large share of the world's zinc and lead.5
Sulfide accumulated undiluted only during pauses in clastic sedimentation, so explorers look for this time break in the stratigraphy and test it along strike and test other stratigraphic levels on the same growth fault for more deposits.5
The SEDEX model
Tectonic setting
- Intracratonic rift basins (Mount Isa-McArthur, Belt-Purcell)1
- Epicratonic passive margins (Selwyn basin, Brooks Range) and distal back arcs (Rhenish basin)1
Host rocks
- Carbonaceous black shale and siltstone with 3 to 10% organic carbon1,3
- Cherty argillite and chert1,3
Alteration
- Feeder-zone silicification, tourmaline, albite, chlorite, dolomite and Fe-Mn carbonate1,2,3
- Tourmalinite pipe about 1 km across beneath Sullivan1
Ore minerals
- Sphalerite and galena1,2,3
- Pyrite, pyrrhotite (Sullivan, Mount Isa) or marcasite1,2
Pathfinder elements
- Zn, Pb and Mn halos within about 2 km of ore2
- Tl, As, Hg, Ba and Mn halos in black shale and chert extending tens to hundreds of kilometres1
Geophysical signature
- Gravity high over dense sulfide and barite ore (Red Dog, Anarraaq)1
- Gravity lows over thick basin fill against denser basement, and magnetic depth-to-source estimates of basin depth1
Grade and tonnage
- Sedimentary exhalative Zn-Pb, 45 deposits: 1.7, 15 and 130 Mt at the 90th, 50th and 10th percentiles, with zinc at 2.4, 5.6 and 13%, lead at 1.0, 2.8 and 7.7%, silver at 30 g/t (50th) and 160 g/t (10th) and copper at 0.28% (10th)2
- On average about 7% zinc, 3% lead and 60 g/t silver across the deposits compiled by Taylor and others (2009)1
Example deposits
| Deposit | Country | Notes |
|---|---|---|
| Red Dog1,3,4 | United States | Alaska, Brooks Range |
| McArthur River (HYC)1,3,4 | Australia | Northern Territory |
| Howards Pass1,4 | Canada | Yukon, Selwyn basin |
| Sullivan1,2,3 | Canada | British Columbia, Belt-Purcell basin |
| Rammelsberg1,3 | Germany | Rhenish basin, vent-proximal and barite-rich |
Test your SEDEX thesis
Agents walk your SEDEX thesis through the reduced shale basins and their growth faults, the Zn-Pb-Ba geochem, the gravity and IP signature, the historic holes and the open ground.
Other deposit types
Guides
References
- Emsbo, P., Seal, R.R., Breit, G.N., Diehl, S.F., and Shah, A.K., 2016, Sedimentary exhalative (sedex) zinc-lead-silver deposit model: U.S. Geological Survey Scientific Investigations Report 2010-5070-N
- Briskey, J.A., 1986, Descriptive model of sedimentary exhalative Zn-Pb (model 31a), and Menzie, W.D., and Mosier, D.L., Grade and tonnage model of sedimentary exhalative Zn-Pb, in Cox, D.P., and Singer, D.A., eds., Mineral deposit models: U.S. Geological Survey Bulletin 1693
- MacIntyre, D., 1995, Sedimentary exhalative Zn-Pb-Ag (profile E14), in Lefebure, D.V., and Jones, L.D., compilers, 2022, British Columbia Geological Survey mineral deposit profiles, 1995 to 2012, GeoFile 2020-11
- Hofstra, A., and others, 2021, Deposit classification scheme for the Critical Minerals Mapping Initiative Global Geochemical Database, U.S. Geological Survey Open-File Report 2021-1049, Table 2 (sediment-hosted group)
- Jackson, A., Ore Deposits 101, Part 7: VMS and Sedex (video lecture, YouTube)