Bauxite deposits
Bauxite is residual aluminium ore, mostly gibbsite, boehmite and diaspore with lesser goethite, hematite, kaolinite and anatase, formed by intense tropical weathering of aluminous rock.1,2
Lateritic bauxite forms in place on well-drained plateaus over aluminous silicate rock, and karst bauxite concentrates in depressions on limestone and dolomite karst.1,2,3
Lateritic bauxite is mostly Cenozoic and karst bauxite Paleozoic to Cenozoic, and the ore mineral shifts with age from gibbsite in Quaternary karst bauxite to boehmite in Mesozoic and Paleozoic.1
In the USGS model the median lateritic deposit holds about 25 Mt at about 45 percent Al2O3, about one in ten exceeds 730 Mt, and the median karst deposit holds about 23 Mt at about 49 percent Al2O3.1
Most bauxite is processed into aluminium, and most refined gallium is a by-product of that processing.2
The bauxite model
Tectonic setting
- Stable, low-relief tropical terrain protected from erosion1,3
- Well-drained plateaus in hot, wet climates (lateritic) and karst surfaces on limestone and dolomite (karst)1
Host rocks
- Lateritic type: any aluminous silicate rock1
- Karst type: residual and transported clay, felsic ash and aluminous sediment in karst depressions1,2
Alteration
- Bauxite is the weathering product itself, under thin soil and over saprolite1
- Low-iron bauxite where organic complexing removed Fe, locally in poorly drained ground and in some karst deposits with minor coal1
Ore minerals
- Gibbsite, or gibbsite with boehmite, in lateritic bauxite1
- Boehmite in Mesozoic and Paleozoic karst bauxite, diaspore in some, with hematite, goethite, anatase and kaolinite gangue1,2
Pathfinder elements
- Al and Ga1
- Ga averages about 41 ppm in bauxite (range 8 to 812 ppm), 56 ppm in lateritic and 41 ppm in karst samples, with no significant difference apparent between the two types2
Geophysical signature
- GPR at 200 and 400 MHz mapped layer boundaries, depth and thickness of lateritic bauxite at Paragominas, Brazil, where no clay cap is present4
- Clay cap about 12 m thick attenuates GPR and masks the ore zone4
Grade and tonnage
- Lateritic type, 122 deposits: about 0.87, 25 and 730 Mt at the 90th, 50th and 10th percentiles, with about 35, 45 and 55 percent Al2O31
- Karst type, 41 deposits: about 3.1, 23 and 170 Mt at the same percentiles, with about 39, 49 and 59 percent Al2O31
Example deposits
| Deposit | Country | Notes |
|---|---|---|
| Weipa1,3 | Australia | Queensland, lateritic |
| Sangaredi1 | Guinea | lateritic |
| Trombetas1 | Brazil | lateritic |
| Clarendon and St. Ann plateaus1,2 | Jamaica | karst |
| Parnassus-Helikon1,3 | Greece | karst, Mediterranean bauxite belt |
Test your bauxite thesis
Agents walk your thesis through the geology, geophysics, drill holes, reports and claims. Overlay host rock, structure, geophysics and open ground to find target areas.
Other deposit types
Guides
References
- Patterson, S.H., 1986, Descriptive models of laterite type bauxite (model 38b) and karst type bauxite (model 38c), and Mosier, D.L., 1986, Grade and tonnage models of laterite type and karst type bauxite deposits, in Cox, D.P., and Singer, D.A., eds., Mineral deposit models: U.S. Geological Survey Bulletin 1693
- Foley, N.K., Jaskula, B.W., Kimball, B.E., and Schulte, R.F., 2017, Gallium, chap. H of Schulz, K.J., DeYoung, J.H., Jr., Seal, R.R., II, and Bradley, D.C., eds., Critical mineral resources of the United States: U.S. Geological Survey Professional Paper 1802-H
- Hofstra, A., Lisitsin, V., Corriveau, L., Paradis, S., Peter, J., and others, 2021, Deposit classification scheme for the Critical Minerals Mapping Initiative Global Geochemical Database: U.S. Geological Survey Open-File Report 2021-1049, Table 2 (laterite group rows: bauxite and karst bauxite)
- Duarte, G.M., Luiz, J.G., Silva, M.W.C., and Maurity, C., 2012, Viabilidade da aplicação do GPR para o mapeamento de camadas de bauxita laterítica e de goethita: Revista Brasileira de Geociências, v. 42, no. 2, p. 423-432