Research/Deposit model

Polymetallic carbonate replacement (CRD) deposits

CRDs are massive sulfide lenses, mantos, chimneys and veins of sphalerite, galena, pyrite and silver sulfosalts replacing limestone or dolomite near small, high-level felsic to intermediate intrusions.1,2,4

They sit distal to skarns and small high-level felsic intrusions, and districts commonly zone outward from a Cu-rich core through Pb-Ag to a Zn-Mn fringe.1,2,4

Fluid inclusion temperatures above 300°C, high Ag with Sn, W and complex sulfosalts, and the link to skarns mark them as high-temperature replacements.2

The USGS median of 52 districts is about 1.8 Mt at about 5.2 percent Pb, 3.9 percent Zn and 150 g/t Ag, and about one in ten exceeds 14 Mt.1

Orebodies are generally small, irregular and discontinuous, controlled by faults, fault intersections, anticlinal crests, favourable beds and karst.2

The CRD model

Tectonic setting

  • Mostly mobile belts with moderate deformation intruded by small plutons1
  • Miogeoclinal to platform carbonate sequences cut by felsic intrusions, as in the Canadian Cordilleran miogeocline and northern Mexico2

Host rocks

  • Limestone and dolomite, commonly with shale, and massive limestone hosts best in the Canadian Cordillera1,2
  • Porphyritic calc-alkaline stocks and dikes of granite, quartz monzonite and intermediate rocks, commonly with related volcanics above1,2

Alteration

  • Dolomitized and jasperoid-silicified limestone, with coarser jasperoid carrying barite and pyrite near ore1,2
  • Chlorite and clay alteration of shale and igneous rocks1,2

Ore minerals

  • Galena, sphalerite and pyrite with argentite, tetrahedrite and other silver sulfosalts1,2
  • Enargite and chalcopyrite in the copper core, and sphalerite with rhodochrosite in the outer zone1

Pathfinder elements

  • Cu, Pb, Ag, Zn and Mn in district zoning, with Au, As, Sb and Bi locally1,2
  • Ba and Ag in ore-related jasperoid, and Ag, Pb, Zn and Sn in BC stream silts with F in waters1,2

Geophysical signature

  • Most massive sulfide bodies are dense, conductive and chargeable, so gravity, EM, resistivity and IP often find them, with magnetic highs where magnetite or pyrrhotite is present4
  • Resistivity highs over silicified zones, and regional magnetics and gravity may pick out the faults and intrusions that control ore4

Grade and tonnage

  • USGS, 52 districts: about 0.24, 1.8 and 14 Mt at the 90th, 50th and 10th percentiles, Pb about 1.2, 5.2 and 21 percent, Zn about 0.82, 3.9 and 19 percent, and Ag about 150 g/t (50th) and 690 g/t (10th)1
  • Single deposits average about 1 Mt at tens to hundreds of g/t Ag and 5 to 20 percent Pb plus Zn, and Santa Eulalia produced about 24 Mt at about 300 g/t Ag, 8 percent Pb and 9 percent Zn2

Example deposits

DepositCountryNotes
Santa Eulalia1,2,3MexicoChihuahua
Naica1,2,3MexicoChihuahua
Leadville2,3United StatesColorado, 30 Mt at 70 to 130 g/t Ag
East Tintic1,2,3United StatesUtah
Midway2,3CanadaBritish Columbia, 1 Mt resource at 400 g/t Ag

Test your CRD thesis

Agents walk your thesis through the geology, geophysics, drill holes, reports and claims. Overlay host rock, structure, geophysics and open ground to find target areas.

Start a thesis →

Other deposit types

Guides

References

  1. Morris, H.T., 1986, Descriptive model of polymetallic replacement deposits (model 19a), and Mosier, D.L., Morris, H.T., and Singer, D.A., 1986, Grade and tonnage model of polymetallic replacement deposits, in Cox, D.P., and Singer, D.A., eds., Mineral deposit models: U.S. Geological Survey Bulletin 1693
  2. Nelson, J.L., 1996, Polymetallic mantos Ag-Pb-Zn (profile J01), in Lefebure, D.V., and Jones, L.D., compilers, 2022, British Columbia Geological Survey mineral deposit profiles, 1995 to 2012: BC Geological Survey GeoFile 2020-11
  3. Hofstra, A., Lisitsin, V., Corriveau, L., Paradis, S., Peter, J., and others, 2021, Deposit classification scheme for the Critical Minerals Mapping Initiative Global Geochemical Database: U.S. Geological Survey Open-File Report 2021-1049, Table 2 (replacement polymetallic row)
  4. Plumlee, G.S., Montour, M., Taylor, C.D., Wallace, A.R., and Klein, D.P., 1995, Polymetallic vein and replacement deposits (models 19a and 22c), in du Bray, E.A., ed., Preliminary compilation of descriptive geoenvironmental mineral deposit models: U.S. Geological Survey Open-File Report 95-831, chap. 14