Research/Deposit model

Pegmatites

LCT pegmatites are very coarse-grained granitic intrusions rich in lithium, cesium and tantalum, and their main lithium ore minerals are spodumene, petalite and lepidolite.1,2,4

Most researchers interpret them as products of extreme fractional crystallization of peraluminous, mostly S-type granite, and the most fractionated bodies intrude up to 10 km from the parent granite.1,3,4

Most intruded late in collisional orogeny into upper greenschist to amphibolite-facies metasedimentary and metavolcanic rocks, and many of the largest are in Archean and Paleoproterozoic orogens.1,2

In zoned bodies the intermediate zones generally carry the lithium, cesium and tantalum, and pollucite, the only cesium ore mineral, forms only in the most fractionated pegmatites.1

Greenbushes has a Mineral Resource of 457 Mt at 1.6% Li2O and Pilgangoora 403 Mt at 1.33% Li2O, and Greenbushes sells SC6 (spodumene concentrate grading 6% Li2O) and Pilgangoora SC5.2 (5.2% Li2O).6,7,8

Grain size and origin

A pegmatite is an essentially igneous rock, commonly granitic, with an extremely coarse but variable grain size or an abundance of crystals with skeletal, graphic or strongly directional growth habits (London's definition, quoted in the USGS LCT model). The British Geological Survey sets pegmatite grain size at more than 16 mm (BGS), and the largest spodumene crystal on record, from the Etta mine in South Dakota, was 14.3 m long (USGS LCT model).

Most researchers interpret LCT (lithium-cesium-tantalum) pegmatites as products of extreme fractional crystallization of pluton-sized batches of granitic magma, and starting from 6 ppm Cs, the average in obsidian, 99.9 percent of the melt had to crystallize to reach Tanco's bulk cesium content. H2O, B, F and P act as fluxes, so they lower the solidus to about 350 to 550 °C (against 600 to 800 °C for wet granite), lower viscosity and increase diffusion rates, and thermal models give days to years for a dyke to crystallize (USGS LCT model).

In liquidus undercooling a melt cools well below its liquidus temperature before crystals start to grow, and David London interprets the graphic granite and inward-growing crystals of the outer zones as growth from a viscous melt after large liquidus undercooling (London 2023).

Classes and families

Černý and Ercit classify granitic pegmatites two ways. By geological setting there are five classes (abyssal, muscovite, muscovite-rare-element, rare-element and miarolitic), and by origin there are three families. LCT pegmatites are enriched in Li, Cs and Ta (with Rb, Be, Sn, B, P and F) and derive mainly from S-type granites. NYF pegmatites are enriched in Nb, Y and F (with Be, rare-earth elements, Sc, Ti, Zr, Th and U) and derive from A- and I-type granites, and a third family has a mixed NYF and LCT signature (Černý and Ercit 2005).

Most granitic pegmatites lack rare-element enrichment, and these common pegmatites supply ceramic-grade feldspar, ultrapure quartz and muscovite, as at Spruce Pine, North Carolina. Gem pegmatites contain miarolitic pockets lined with aquamarine, morganite, kunzite or elbaite, and miners work many otherwise subeconomic bodies for gems and museum specimens (USGS LCT model).

Zoning

Cameron and others (1949) mapped hundreds of US pegmatites and defined four zones, and a zoned pegmatite crystallizes from the border inward. The border zone is a chilled aplite margin about 1 cm thick, and the wall zone, usually under 3 m thick, is albite, perthite, quartz and muscovite. One or more intermediate zones contain the giant crystals and, in evolved bodies, the beryl, spodumene, elbaite, columbite-tantalite and pollucite, and the core is often pure quartz. Replacement bodies and later fracture fillings overprint these zones. The zoning shows in map view as well as in section, so what looks like a common pegmatite at surface may be the edge of a mineralized body (USGS LCT model).

Some large deposits have different zoning. At Greenbushes the highest lithia (Li2O) grades occur along both margins of the Central Lode, where spodumene reaches 50 percent of the rock (about 4% Li2O), and most of the tin and tantalum occurs in an albite zone (IGO). Kings Mountain is a swarm of spodumene-albite-quartz dykes with almost no zoning (USGS LCT model).

Lithium minerals and concentrate

Pure spodumene (LiAlSi2O6) carries 3.73 percent lithium, petalite 2.09 percent and lepidolite 3.58 percent (USGS PP 1802-K). Spodumene commonly takes up ferric iron, which can complicate refining and lower its value for ceramics, and refiners heat its natural alpha form above 1,100 °C to convert it to beta-spodumene before extracting the lithium. Petalite is normally pure and generally occurs in the most fractionated bodies (USGS LCT model).

Producers sell spodumene concentrate by Li2O grade. SC6, the chemical-grade product for battery precursors, grades 6% Li2O, and the Greenbushes technical-grade plant makes about 5 to 7.2% Li2O concentrates for ceramics and specialty glass (IGO). In 2025 Greenbushes made 1.35 Mt of concentrate from 6.16 Mt of ore at 1.9% Li2O, a mass yield of about 22 percent (IGO).

Geological setting

All LCT pegmatites intruded orogenic hinterlands, the metamorphic cores of mountain belts, and most formed during continental collision. Their ages cluster at about 2640, 1800, 960, 485 and 310 Ma, the times of collisional orogeny and supercontinent assembly, and no known pegmatite intrudes unmetamorphosed sedimentary rock (USGS LCT model). The potential for giant deposits seems greatest in Archean collision zones (USGS PP 1802-K).

Around a parent granite the nearest pegmatites are barren, and bodies farther out carry beryl, then beryl and columbite, then tantalite and lithium aluminosilicates, and the most evolved bodies, ideally the most distal and up to 10 km from the granite, carry pollucite (USGS LCT model).

Major deposits

Deposit Country Geology Resource Owner
Greenbushes Australia Archean Central Lode in the Donnybrook-Bridgetown Shear Zone 457 Mt at 1.6% Li2O, 2025 Tianqi, IGO and Albemarle, operated by Talison
Pilgangoora Australia Stacked dykes up to 65 m thick in mafic and ultramafic volcanic rocks 403 Mt at 1.33% Li2O, 2026 PLS
Manono DR Congo Pegmatite exposed 12 km long and up to 400 m wide 842 Mt at 1.61% Li2O, 2024 Disputed, in international arbitration at January 2024
Tanco Canada Flat-lying zoned lens, one of two pollucite mines 7.3 Mt at 2.76% Li2O, USGS 2017 compilation Sinomine
Bikita Zimbabwe Zoned body 1,700 m long with petalite, lepidolite and pollucite 12 Mt at 1.4% Li2O, USGS 2017 compilation Sinomine
Whabouchi Canada Steep dyke swarm 1,340 m long Reserve 26.5 Mt at 1.32% Li2O, 2025 Rio Tinto and Investissement Québec
Kings Mountain United States Spodumene dykes up to 75 m wide 5.9 Mt lithium in the district, 2011 Albemarle, idle since the early 1990s

The USGS LCT model gives the Manono, Tanco, Bikita and Kings Mountain geology and the Tanco and Bikita grades, the Tanco site the Bikita owner, USGS PP 1802-K the Kings Mountain estimate, and the other estimates follow the JORC Code.

Exploration

In the desktop study and regional mapping, geologists screen for an orogenic hinterland, host rocks of upper greenschist to lower amphibolite facies and fertile granites with green muscovite, garnet and tourmaline, high Cs, Li, Rb, Sn and Ta and low Ca, Fe and Mg. New LCT pegmatites are most likely near known ones, and the structurally highest bodies in a field are the most promising (USGS LCT model).

In outcrop, geologists find pegmatites easily because they're light-coloured, coarse-grained and resistant, but in deeply weathered terrain float may be the only sign. K-feldspar with more than 3,000 ppm Rb, K/Rb under 30 and more than 100 ppm Cs marks the most fractionated pegmatites, as does muscovite with more than 2,000 ppm Li. Soil over the buried Tanco pegmatite carries at least 175 ppm Li and 110 ppm Rb, and at Greenbushes As, Sn, Be and Sb form a 12 by 20 km halo in lateritic soil, and Nb, Ta and B a 1 by 5 km halo. Holmquistite, a purple lithium amphibole, can form up to 20 m into mafic host rocks. Cassiterite, tantalite, elbaite and spessartine serve as heavy indicator minerals, but spodumene degrades near surface, and in the Pilbara cassiterite and columbite-tantalite placers formed from weathered pegmatites (USGS LCT model).

LCT pegmatites have no strong geophysical signature, because their density is close to the host rock's, the bodies are small and they carry too little iron to show in aeromagnetics. A gravity survey resolved the zoning at Tanco, and radiometrics detect uranium-bearing bodies (USGS LCT model). Drilling defines the deposit, and the Pilgangoora Mineral Resource is based on reverse circulation (RC) and diamond holes, with RC holes sampled at 1 m intervals through pegmatite and typically 1 to 6 m into the host rock on either side (PLS).

Economics

Excluding the US, world lithium output rose 31 percent to about 290,000 t in 2025. Australia mined an estimated 92,000 t from seven mineral operations and Zimbabwe 28,000 t from five, and batteries accounted for 88 percent of lithium use. Spodumene concentrate (6% Li2O) prices, FOB Australia, rose from about US$800 a tonne in January 2025 to about US$970 in November (USGS).

PLS ships about SC5.2, spodumene concentrate at about 5.2% Li2O, from Pilgangoora. Its estimated realized price in the September 2026 quarter was US$2,077 a tonne on an SC6-equivalent basis (CIF China), against an FOB unit operating cost of A$539 (US$381) a tonne, and its P2000 expansion study assumes US$1,620 a tonne SC6 for the long term (PLS). PLS also sells tantalite concentrate from Pilgangoora (PLS), Talison makes a tin-tantalum concentrate at Greenbushes for Global Advanced Metals (IGO), and Tanco makes cesium products (Tanco).

The pegmatite model

Tectonic setting

  • Orogenic hinterlands, the metamorphic cores of mountain belts, as indirect products of plate convergence1,2
  • Mostly continental or microcontinent collision, with emplacement late syntectonic to early post-tectonic1,2

Host rocks

  • Metasedimentary and metavolcanic rocks of upper greenschist to amphibolite facies, about 500 to 650 °C and 200 to 400 MPa1
  • Mafic and ultramafic volcanic rocks and amphibolite, as at Pilgangoora, Greenbushes and Tanco1,7,8

Alteration

  • Exomorphic haloes of Li, Rb, Cs, B and F in the country rock1
  • Holmquistite, a purple lithium amphibole, in mafic host rocks up to 20 m from the pegmatite1

Ore minerals

  • Spodumene (LiAlSi2O6, 3.73 percent Li), petalite (2.09 percent Li) and lepidolite (3.58 percent Li)1,2
  • Columbite-tantalite and microlite for tantalum, and cassiterite for tin1

Pathfinder elements

  • Li, Cs and Ta with Rb, Be, Sn, B, P, F, Mn, Ga, Nb and Hf1
  • K-feldspar with more than 3,000 ppm Rb, K/Rb under 30 and more than 100 ppm Cs in the most fractionated pegmatites1,3

Geophysical signature

  • No strong signature, because pegmatite density is close to that of the host rock and the bodies are small1
  • Too low in iron to show in aeromagnetic surveys1

Grade and tonnage

  • 10 LCT deposits in the USGS compilation range from 1.6 to 70.4 Mt and 0.7 to 2.76% Li2O, and Tanco is highest in grade at 7.3 Mt at 2.76% Li2O1
  • Greenbushes Mineral Resource 457 Mt at 1.6% Li2O and open-pit Ore Reserve 176 Mt at 1.9% Li2O at 31 December 2025, 100 percent basis7

Example deposits

DepositCountryNotes
Greenbushes1,7AustraliaWestern Australia, Archean Central Lode in the Donnybrook-Bridgetown Shear Zone, operated by Talison
Pilgangoora8AustraliaWestern Australia, spodumene and tantalite in stacked dykes in the Pilbara, owned by PLS
Tanco1,10CanadaManitoba, flat-lying zoned body under Bernic Lake and one of two pollucite mines in the world, owned by Sinomine
Manono (Roche Dure)1,9Democratic Republic of the CongoManono-Kitotolo pegmatite, exposed 12 km long and up to 400 m wide, ownership in arbitration at January 2024
Bikita1,10ZimbabweZoned body 1,700 m long with petalite, lepidolite, spodumene and pollucite, owned by Sinomine

Test your pegmatite thesis

Agents walk your pegmatite thesis through the fertile two-mica granites, the metamorphic host rocks and shear zones, the Li, Cs, Ta and K/Rb geochem, the historic holes and the open ground.

Start a thesis →

Other deposit types

Guides

References

  1. Bradley, D.C., McCauley, A.D., and Stillings, L.M., 2017, Mineral-deposit model for lithium-cesium-tantalum pegmatites: U.S. Geological Survey Scientific Investigations Report 2010-5070-O
  2. Bradley, D.C., Stillings, L.L., Jaskula, B.W., Munk, L., and McCauley, A.D., 2017, Lithium, chap. K of Schulz, K.J., and others, eds., Critical mineral resources of the United States: U.S. Geological Survey Professional Paper 1802-K
  3. Bradley, D., and McCauley, A., 2013, A preliminary deposit model for lithium-cesium-tantalum (LCT) pegmatites (ver. 1.1, December 2016): U.S. Geological Survey Open-File Report 2013-1008
  4. Černý, P., and Ercit, T.S., 2005, The classification of granitic pegmatites revisited: The Canadian Mineralogist, v. 43, p. 2005-2026
  5. Jaskula, B.W., 2026, Lithium, in Mineral commodity summaries 2026: U.S. Geological Survey
  6. IGO Limited, 2026, Greenbushes CY25 resource and reserve estimates: ASX release, 12 February 2026
  7. PLS Group Limited, 2026, Pilgangoora Ore Reserve increases 31% in contained lithium: ASX release, 16 October 2026
  8. AVZ Minerals Limited, 2024, Manono Project Mineral Resource increases 47% to 842Mt as Roche Dure tonnages expanded: ASX release, 31 January 2024
  9. Tanco Mine (Sinomine Resource Group), company website, read November 2026