Research/Deposit model

Magmatic Fe-Ti-V oxide deposits

Magmatic Fe-Ti-V oxide deposits are layers, lenses and dike-like bodies of vanadiferous titanomagnetite, ilmenite or hemo-ilmenite in layered mafic intrusions and anorthosite complexes.1,2

Vanadiferous titanomagnetite in layered intrusions is the principal source of vanadium, commonly with 0.2 to 1 percent V2O5 and above 1.5 percent in some Bushveld zones.4

Apart from placers, these deposits are a major TiO2 source, and hemo-ilmenite is mined at Lac Tio in Quebec and Tellnes in Norway.2,3

Oxide layers are typically 0.1 to 10 m thick and can be traced for hundreds of kilometres in the Bushveld Complex, and some Panzhihua layers reach 60 m.4

Ti mineralogy matters more than TiO2 grade, and hemo-ilmenite ore needs crushing and separation, so it must be high grade.3

The Fe-Ti-V oxide model

Tectonic setting

  • Mostly Precambrian intraplate cratons, with most titanomagnetite deposits in large igneous provinces1,4
  • Ilmenite deposits: commonly AMCG (anorthosite-mangerite-charnockite-granite) suites, conventionally interpreted as anorogenic or extensional, mainly 1.65 to 0.90 Ga2

Host rocks

  • Gabbro, norite, anorthosite, troctolite and pyroxenite in the upper parts of large layered intrusions1,2
  • Andesine anorthosite massifs and later ferrodiorite and norite in granulite-facies terranes1,2,3

Alteration

  • No alteration related to ore, and host rocks are not normally altered1,2
  • Magnetite may weather to vanadomaghemite and minor hematite with ore texture intact, and magnetite blocks occur in soil and alluvium1,4

Ore minerals

  • Vanadiferous titanomagnetite, with V in the magnetite-ulvöspinel, and ilmenite1,4
  • Ilmenite and hemo-ilmenite, with rutile or apatite in some anorthosite-hosted ores1,2,3

Pathfinder elements

  • Fe, Ti and V1,2
  • Cr, Ni, Cu and Co, and high Ti, P and Zr with ferrodiorite-hosted ilmenite-apatite ore1,2

Geophysical signature

  • Host intrusions are generally apparent as aeromagnetic anomalies even under cover, and coincident magnetic and EM anomalies get ground gravity, IP, resistivity and EM follow-up4
  • Ilmenite-rich bodies can give a subdued or strongly negative magnetic anomaly2

Grade and tonnage

  • Ilmenite deposits up to several hundred Mt at 10 to 75 percent TiO2, Tellnes 300 Mt at 18 percent and Lac Tio over 125 Mt at 32 percent2
  • Titanomagnetite deposits up to about a billion tonnes at 20 to 45 percent Fe, 2 to 20 percent TiO2 and V averaging about 0.25 percent, and Windimurra holds 242.6 Mt at 0.48 percent V2O52,4

Example deposits

DepositCountryNotes
Bushveld Complex1,4South Africamagnetite layers in the upper part, Mapochs and Rhovan
Panzhihua3,4ChinaSichuan, Permian layered intrusion
Windimurra4AustraliaWestern Australia, vanadiferous titanomagnetite
Lac Tio2,3,5CanadaQuebec, hemo-ilmenite in anorthosite
Tellnes2,3,5Norwayhemo-ilmenite norite in anorthosite

Test your Fe-Ti-V oxide thesis

Agents walk your thesis through the geology, geophysics, drill holes, reports and claims. Overlay host rock, structure, geophysics and open ground to find target areas.

Start a thesis →

Other deposit types

Guides

References

  1. Page, N.J, 1986, Descriptive model of Bushveld Fe-Ti-V (model 3), and Force, E.R., 1986, Descriptive model of anorthosite Ti (model 7b), in Cox, D.P., and Singer, D.A., eds., Mineral deposit models: U.S. Geological Survey Bulletin 1693
  2. Gross, G.A., Gower, C.F., and Lefebure, D.V., 1999, Magmatic Ti-Fe±V oxide deposits (profile M04), in Lefebure, D.V., and Jones, L.D., compilers, 2022, British Columbia Geological Survey mineral deposit profiles, 1995 to 2012: BC Geological Survey GeoFile 2020-11
  3. Woodruff, L.G., Bedinger, G.M., and Piatak, N.M., 2017, Titanium, chap. T of Schulz, K.J., DeYoung, J.H., Jr., Seal, R.R., II, and Bradley, D.C., eds., Critical mineral resources of the United States: U.S. Geological Survey Professional Paper 1802-T
  4. Kelley, K.D., Scott, C.T., Polyak, D.E., and Kimball, B.E., 2017, Vanadium, chap. U of Schulz, K.J., DeYoung, J.H., Jr., Seal, R.R., II, and Bradley, D.C., eds., Critical mineral resources of the United States: U.S. Geological Survey Professional Paper 1802-U
  5. Hofstra, A., Lisitsin, V., Corriveau, L., Paradis, S., Peter, J., and others, 2021, Deposit classification scheme for the Critical Minerals Mapping Initiative Global Geochemical Database: U.S. Geological Survey Open-File Report 2021-1049, Table 2 (U-M layered intrusion iron-titanium-vanadium and anorthosite massif titanium rows)